Service hotline:
86-0755-27350605
 
Products
Contact

Shenzhen LED Color Opto Electronic Co.,Ltd
Tel:+86-0755-27350605
Fax:+86-0755-23245913
E-mail:info@szlcoe.com
Website:www.led-color.com

LED Chip Current Position: Home > Products > LED Chip
WS2812B 5050 RGB LED Chip

Features and Benefits

l.Intelligent reverse connect protection, the power supply reverse

connection does not damage the IC.2 The control circuit and the

LED share the only power source.

2.Control circuit and RGB chip are integrated in a package of 5050

components, form a complete control of pixel point.

3. Built-in signal reshaping circuit, after wave reshaping to the next

driver, ensure wave-form distortion not accumulate.

4. Built-in electric reset circuit and power lost reset circuit.

5. Each pixel of the three primary color can achieve 256 brightness

display, completed 16777216 color full color display, and scan

frequency not less than 400Hz/s.

6. Cascading port transmission signal by single line.

7.Any two point the distance more than 5m transmission signal

without any increase circuit.

8 When the refresh rate is 30fps, cascade number are not less than

1024 points.

9. Send data at speeds of 800Kbps.

10.l The color of the light were highly consistent, cost-effective..

Applications

11. Full-color module, Full color soft lights a lamp strip.

12. LED decorative lighting, Indoor/outdoor LED video irregular screen.


  • General description

    WS2812B is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of
    5050 components. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.
    Also include a precision internal oscillator and a 12V voltage programmable constant current control part, effectively
    ensuring the pixel point light color height consistent. The data transfer protocol use single NZR communication mode.
    After the pixel power  on reset, the DIN  port receive data from controller, the first pixel collect initial 24bit data then
    sent to the internal data latch,   the other data which reshaping by the internal signal reshaping amplification circuit sent
    to the next cascade  pixel through the DO port. After transmission for each pixel,the signal to reduce 24bit. pixel adopt
    auto resha-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only
    depend on the speed of signal transmission.LED with low driving voltage, environmental protection and energy saving,
    high brightness, scattering angle is large, good consistency, low power, long life and other advantages. The control chip
    integrated in LED   above becoming more simple circuit, small volume, convenient installation.


    LED characteristic parameter

    Emitting color

    Model

    Wavelength(nm)

    Luminous intensity(mcd)

    Voltage(V)

    Red

    13CBAUP

    620-625

    390-420

    2.0-2.2

    Green

    13CGAUP

    522-525

    660-720

    3.0-3.4

    Blue

    10R1MUX

    465-467

    180-200

    3.0-3.4


    WS2812B LED Datasheet



  • upload/201506/WS2812B LED.pdf
Copyright © 2013-2015 Shenzhen LED Color Opto Electronic Co.,Ltd All Rights Reserved
展开客服