Superbright DIP top LED & viewing angle, high brightness output, no spot and shadow. Colors can be chosen as Full color Low power consumption & operating voltage, safe and energy-saving. With IP67 protection rating. Solid-state, high shock or vibration resistant, long lifetime, more than 50000 hours. Easy installation with mounting holes and 3M adhesive tape on the back.
Parameter： RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs Each dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). The pixels must be clocked by a microcontroller, we have an example code linked below that works on an Arduino, it should be simple to adapt it to any other microcontroller. The pixels use 5mm difuse RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED