2. Remote Control
1. Functions Of Each Button:
|
ON/OFF
|
To control the LED ON or OFF
|
|
MODE+
|
Switching patterns forwardly
|
|
MODE-
|
Switching patterns backwardly
|
|
SPEED+
|
Switching speed forwardly
|
|
SPEED-
|
Switching speed backwardly
|
|
AUTO
|
Run internal pattern automatically
|
|
NUM+
|
Add the number of pixels on each section
|
|
NUM-
|
Decreased the number of pixels on each section
|
|
SEC+
|
Add number of section.
|
|
SEC-
|
Decreased number of section.
|
|
MATCH
|
Match the Remote control with the receiving controller
|
2. Testing and Matching:
Pressing and hold the AUTO button for up to 3 seconds until LED is out, release the AUTO button to into the mode of switching
in red,green,blue,yellow,purple,cyan and white,witch to test the your LED.
Pressing and hold the MATCH button for up to 3 seconds to match the Remote control with the receiving controller. Pressing and
hold the MATCH button for up to 3 seconds to un-match.
3. Sections:
Some of the patterns run in several sections, each section is the same. User can make the number of sections as follow: 5, 10, 15, 20,
25, 30,35. Pixel number of each section can be chosen as follow: 20, 30, 40, 50, 60, 70 .Sum of pixels = Sections*Number per section
4. User Setting Saving:
User’s each pressing on the button can be saved by the controller automatically. When the controller is power off, next time power
up,it will work the way as the same as before.
3. Receiving Controller：
Can be customized to support almost every kind of one-wire or two-wire LED-DRIVER-IC .User can specify to support which IC before our delivery,and also,user can modify the status of R5,R6,R7,R8 on the PCB to meet their needs:
|
Actions
|
To support IC
|
|
Short none of R5,R6,R7,R8
|
WS2811
|
|
Short R5,breakR6,R7,R8
|
WS2801
|
|
Short R6,breakR6,R7,R8
|
LPD6803
|
|
Short R7,breakR6,R7,R8
|
LPD8806
|
|
Short R8,breakR5,R6,R7
|
UCS9812
|
|
Short R5,R6,breakR7,R8
|
UCS1903,APA104
|
|
Short R6,R7,breakR5,R8
|
APA102
|
|
Short R7,R8,breakR5,R6
|
TM1804,TM1809
|
The receiver controller has two versions:5V-supply-voltage and 12V-supply-voltage.
Cautions: Please make sure the power supply voltage is match to your controller before you power it.
4. Wire Connection：
also can customize the color changing program for the addressable RGBW 4in1 led strips,such as sk6812 rgbw,ucs2912 rgbw led strips
