服务热线:
+86-0755-27350605
 
产品展示
联系我们

深圳市色彩光电有限公司

地址:深圳市光明区宝山路22号汉海达高新产业园一栋8楼

电话:0755-27350605

传真:0755-23245913

邮箱:info@szlcoe.com
网址:www.led-color.com

LED 灯珠 您当前的位置: 首页 > 产品展示 > LED 灯珠
SK6812/LC8812B 侧发光灯珠
  • SK6812 SIDE is a smart LED control circuit and light emitting circuit in one controlled LED source,
    which has the shape of a 4020 LED chip. Each lighting element is a pixel, and the intensities of the
    pixels are contained within the intelligent digital interface input. The output is driven by patented PWM
    technology, which effectively guarantees high consistency of the color of the pixels. The control
    circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high
    precision RC oscillator.
    The data protocol being used is unipolar NRZ communication mode. The 24-bit data is transmitted
    from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an
    internal data latch, the remaining data is passed through the internal amplification circuit and sent out
    on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic
    shaping forwarding technology makes the number of cascaded pixels without signal transmission only
    limited by signal transmission speed.
    The LED has a low driving voltage (which allows for environmental protection and energy saving),
    high brightness, scattering angle, good consistency, low power, and long life. The control circuit is
    integrated in the LED above.
    2. Main Application Field:
    ●  Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,
    LED appearance / scene lighting
    ●  LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical
    equipment etc..
    3. Description:
    ●  Top SMD internal integrated high quality external control line serial cascade constant current IC;
    ●  control circuit and the RGB chip in SMD 4020 components, to form a complete control of pixel, color
    mixing uniformity and consistency;
    ●  built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform
    distortion will not guarantee a line;
    ●  The built-in power on reset and reset circuit, the power does not work;
    ●  gray level adjusting circuit (256 level gray scale adjustable);
    ●  red drive special treatment, color balance;
    ●  line data transmission;
    ●  plastic forward strengthening technology, the transmission distance between two points over 10M;

    ●  Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec


  • upload/202210/LC8812B 4020 EN.pdf
Copyright © 2013-2015 深圳市色彩光电有限公司 All Rights Reserved
展开客服