Service hotline:
86-0755-27350605 /+86-13670216169
 
Products
Contact

Shenzhen LED Color Opto Electronic Co.,Ltd
Tel:+86-0755-27350605

Mobile Phone: +86-13670216169
Fax:+86-0755-23245913
E-mail:info@szlcoe.com
Website:www.led-color.com

LED Chip Current Position: Home > Products > LED Chip
WS2812B Mini LED
WS2812 Mini 3535 RGB LED

Model No.: WS2812-Mini

Description: 3.5x3.5x1.95mm

0.2Watt Power

IC: 3ch WS2812

Integrated light source Intelligent control LED


  • WS2812B Mini 3535 RGB LED


    Features and Benefits

    The IC’s control circuit and the LED share the same power supply.
    Control circuit and RGB chip are integrated in a package component, to form a complete external control
    pixel.
    Built-in signal reshaping circuit, any pixel receives the signal, and then re-export after waveform reshaping to
    ensure that the waveform distortion of the circuit will not accumulate.
    Built-in Power-on reset and Power-off reset circuits.
    The three primary color of each pixel can achieve 256 level Gray scale, and to fulfill 16777216 colors full-color
    display, its scan frequency is higher than 400Hz/s.
    The reception and decoding of cascading data can be completed by a Serial Interface.
    Any two transmission distance not more than 3 Meters, without adding any circuit.
    When the refresh rate of 30fps, cascade numbers are not less than 1024 points.
    Data transfer speeds up to 800Kbps. Highly brightness consistency, and cost-effective.

    WS2812B MINI LED Datasheet

    http://www.led-color.com/upload/201606/WS2812B Mini.pdf


    Applications
    Full-color module, Full-color flexible strip.
    LED decorative lighting, Indoor/outdoor LED video irregular screen.
    General description

    WS2812B-Mini is an intelligent control LED light source that the control circuit and RGB chip are integrated in a

    package of 3535 component. It internal include intelligent digital port data latch and signal reshaping amplification

    drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant current control part,

    effectively ensuring the pixel point light color height consistent.

    The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port

    receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data

    which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO

    port. After transmission for each pixel, the signal to reduce 24bit. pixel adopt auto reshaping transmit technology,

    making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.

    LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angle is large,

    good consistency, low power, long life and other advantages.The control chip integrated in LED above becoming

    moresimplecircuit, small volume, convenient installation.

  • upload/201606/WS2812B Mini.pdf
Copyright © 2013-2015 Shenzhen LED Color Opto Electronic Co.,Ltd All Rights Reserved
展开客服